От няколко часа се мъча да подкарам Conky-то заедно със скрипта към него, ама нещо ми се "опъва", така че ми е нужна малко помощ ако може.
Инсталирал съм всичко по указания показал съм пътя до скрипта в ".conkyrc", но не го подкарва и това си е.
Това ми е картинката:
Вижда се, че скрипта отговарящ за графиките на стойностите не бачка.
А това е въпросния скрипт, който съм го сложил според указанията в ~/.conky/graph.lua :
Код: Избери всички
--[[ GRAPH widget v1.1 by wlourf (07.01.2011)
this widget draws some graphs with some effects
http://u-scripts.blogspot.com/2010/10/graph-widget.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/graph.lua
lua_draw_hook_pre main_graph
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display,
for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable,
for example for {$cpu cpu1}, just write arg="cpu1"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach,
for example for {$cpu cpu1}, just write max=100 or less or more
Optional parameters:
x,y - coordinates of the bottom-left corner of the graph,
relative to the top-left corner of the conky window
default = bottom-left corner of the conky window
width - width of the graph, default = 100 pixels
height - height of the graph, default = 20 pixels
nb_values - number of values to display in the graph, default=width
i.e. 1 pixel for 1 value
autoscale - if set to true, calculate the max valeu of the y axis and
doesn't use the max parameter above, default=false
skew_x - skew graph around x axis, défaut = 0
skew_y - skew graph around y axis, défaut = 0
angle - angle of rotation of the graph in degress, default = 0
i.e. a horizontal graph)
inverse - if set to true, graph are draw from right to left, default=false
background - if set to false, background is not drawn, default=true
foreground - if set to false, foreground is not drawn, default=true
foreground = plain graph
bg_bd_size - size of the border of the background, default=0=no border
fg_bd_size - size of the border of the foreground, default=0=no border
Colours tables below are defined into braces :
{position in the gradient (0 to 1), colour in hexadecimal, alpha (0 to 1)}
example for a single colour table :
{{0,0xFFAA00,1}} position parameter doesn't matter
example for a two-colours table :
{{0,0xFFAA00,1},{1,0x00AA00,1}} or {{0.5,0xFFAA00,1},{1,0x00AA00,1}}
example for a three-colours table :
{{0,0xFFAA00,1},{0.5,0xFF0000,1},{1,0x00AA00,1}}
bg_colour - colour table for background,
default = {{0,0x000000,.5},{1,0xFFFFFF,.5}}
fg_colour - colour table for foreground,
default = {{0,0x00FFFF,0.2},{1,0x0000FF,0.2}}
bg_bd_colour- colour table for background border,
default = {{1,0xFFFFFF,1}}
fg_bd_colour- colour table for foreground border,
default = {{1,0xFFFF00,1}}
bg_orientation, bg_bd_orientation, fg_orientation, fg_bd_orientation,
- "orientation" defines the starting point of the gradient,
default="nn"
there are 8 available starting points :
"nw","nn","ne","ee","se","ss","sw","ww"
(n for north, w for west ...)
theses 8 points are the 4 corners + the 4 middles of graph
so a gradient "nn" will go from "nn" to "ss"
a gradient "nw" will go from "nw" to "se"
draw_me - if set to false, graph is not drawn (default = true)
it can be used with a conky string, if the string returns 1, the graph is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (31/10/2010) original release
v1.1 (07/01/2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
text is parsed inside the function, not in the array of settings
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
function set_settings()
graph_settings={
{
name="cpu",
arg="cpu0",
max=100,
y=160,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
{
name="memperc",
arg="",
max=100,
y=240,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
{
name="diskio",
arg="/dev/sda1",
max=100,
y=320,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
{
name="diskio",
arg="/dev/sda5",
max=100,
y=400,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
{
name="downspeedf",
arg="wlp3s0",
max=90,
y=480,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
{
name="upspeedf",
arg="wlp3s0",
max=30,
y=540,
x=90,
autoscale=true,
width=170,
height=50,
nb_values=200,
fg_bd_size=2,
-- bg_colour = {{0,0x007AF6,0.5},{1,0x000000,0.5}},
fg_bd_colour = { {0,0xFF0000,1},{0.5,0xFFA209,1},{1,0xFFFF00,1}},
background=false,
foreground=true,
},
}
end
function check_settings(t)
--tables are check only when conky start
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name'" ..
" with 'arg' or only parameter 'arg' ")
return 1
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
print ("for name=" .. t.name .. " with arg=" .. t.arg)
return 1
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
return 0
end
function conky_main_graph()
if conky_window == nil then return end
local w=conky_window.width
local h=conky_window.height
local cs=cairo_xlib_surface_create(conky_window.display,
conky_window.drawable, conky_window.visual, w, h)
cr=cairo_create(cs)
updates=tonumber(conky_parse('${updates}'))
--start drawing after "updates_gap" updates
--prevent segmentation error for cpu
updates_gap=5
if updates==1 then
set_settings()
flagOK=0
for i in pairs(graph_settings) do
if graph_settings[i].width==nil then graph_settings[i].width=100 end
if graph_settings[i].nb_values==nil then
graph_settings[i].nb_values= graph_settings[i].width
end
--create an empty table to store values
graph_settings[i]["values"]={}
--beginning point
graph_settings[i].beg = graph_settings[i].nb_values
--graph_settings[i].beg = 0
for j =1, graph_settings[i].nb_values do
graph_settings[i].values[j]=0
end
graph_settings[i].flag_init=true
flagOK=flagOK + check_settings(graph_settings[i])
-- if num == nil Then num = 0 end
end
end
if flagOK>0 then
--abort script if error in one of the tables
print ("ERROR : Check the graph_setting table")
return
end
--drawing process
if updates > updates_gap then
for i in pairs(graph_settings) do
if graph_settings[i].draw_me==true then graph_settings[i].draw_me = nil end
if (graph_settings[i].draw_me==nil or conky_parse(tostring(graph_settings[i].draw_me)) == "1") then
local nb_values=graph_settings[i].nb_values
graph_settings[i].automax=0
for j =1, nb_values do
if graph_settings[i].values[j+1]==nil then
graph_settings[i].values[j+1]=0
end
graph_settings[i].values[j]=graph_settings[i].values[j+1]
if j==nb_values then
--store value
if graph_settings[i].name=="" then
value=graph_settings[i].arg
else
value=(conky_parse('${' ..
graph_settings[i].name .. " " ..
graph_settings[i].arg ..'}'))
value=string.gsub(value,"%a","")
value=tonumber(value)
end
graph_settings[i].values[nb_values]=value
end
graph_settings[i].automax=math.max(graph_settings[i].automax,
graph_settings[i].values[j])
--should stop weird glitches at beginning when no values reported yet for upspeed or diskio
if graph_settings[i].automax == 0 then graph_settings[i].automax = 1 end
end
draw_graph(graph_settings[i])
end
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
updates=nil
updates_gap=nil
end
function draw_graph(t)
--drawing function
local function rgb_to_r_g_b(colour)
return ((colour[2] / 0x10000) % 0x100) / 255., ((colour[2] / 0x100) % 0x100) / 255., (colour[2] % 0x100) / 255., colour[3]
end
local function linear_orientation(o,w,h)
--set gradient for bg and bg border
local p
if o=="nn" then
p={w/2,h,w/2,0}
elseif o=="ne" then
p={w,h,0,0}
elseif o=="ww" then
p={0,h/2,w,h/2}
elseif o=="se" then
p={w,0,0,h}
elseif o=="ss" then
p={w/2,0,w/2,h}
elseif o=="ee" then
p={w,h/2,0,h/2}
elseif o=="sw" then
p={0,0,w,h}
elseif o=="nw" then
p={0,h,w,0}
end
return p
end
local function linear_orientation_inv(o,w,h)
--set gradient for fg and fg border
local p
if o=="ss" then
p={w/2,h,w/2,0}
elseif o=="sw" then
p={w,h,0,0}
elseif o=="ee" then
p={0,h/2,w,h/2}
elseif o=="nw" then
p={w,0,0,h}
elseif o=="nn" then
p={w/2,0,w/2,h}
elseif o=="ww" then
p={w,h/2,0,h/2}
elseif o=="ne" then
p={0,0,w,h}
elseif o=="se" then
p={0,h,w,0}
end
return p
end
--set default values
--cancel drawing if not needed
if t.draw_me~=nil and conky_parse(tostring(t.draw_me)) ~= "1" then
return
end
if t.height==nil then t.height=20 end
--checked in previous part : width and nb_values
if t.background==nil then t.background=true end
if t.bg_bd_size==nil then t.bg_bd_size=0 end
if t.x==nil then t.x=t.bg_bd_size end
if t.y==nil then t.y=conky_window.height -t.bg_bd_size end
if t.bg_colour==nil then t.bg_colour={{0,0x000000,.5},{1,0xFFFFFF,.5}} end
if t.bg_bd_colour==nil then t.bg_bd_colour={{1,0xFFFFFF,1}} end
if t.foreground==nil then t.foreground=true end
if t.fg_colour==nil then t.fg_colour={{0,0x00FFFF,0.3},{1,0x0000FF,0.1}} end
if t.fg_bd_size==nil then t.fg_bd_size=0 end
if t.fg_bd_colour==nil then t.fg_bd_colour={{1,0xFFFF00,1}} end
if t.autoscale==nil then t.autoscale=false end
if t.inverse==nil then t.inverse=false end
if t.angle==nil then t.angle=0 end
if t.bg_bd_orientation==nil then t.bg_bd_orientation="nn" end
if t.bg_orientation==nil then t.bg_orientation="nn" end
if t.fg_bd_orientation==nil then t.fg_bd_orientation="nn" end
if t.fg_orientation==nil then t.fg_orientation="nn" end
--check colours tables
for i=1, #t.fg_colour do
if #t.fg_colour[i]~=3 then
print ("error in fg_colour table")
t.fg_colour[i]={1,0x0000FF,1}
end
end
for i=1, #t.fg_bd_colour do
if #t.fg_bd_colour[i]~=3 then
print ("error in fg_bd_colour table")
t.fg_bd_colour[i]={1,0x00FF00,1}
end
end
for i=1, #t.bg_colour do
if #t.bg_colour[i]~=3 then
print ("error in background color table")
t.bg_colour[i]={1,0xFFFFFF,0.5}
end
end
for i=1, #t.bg_bd_colour do
if #t.bg_bd_colour[i]~=3 then
print ("error in background border color table")
t.bg_bd_colour[i]={1,0xFFFFFF,1}
end
end
--calculate skew parameters if needed
if t.flag_init then
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
t.flag_init=false
end
cairo_set_line_cap(cr,CAIRO_LINE_CAP_ROUND)
cairo_set_line_join(cr,CAIRO_LINE_JOIN_ROUND)
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_save(cr)
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
local ratio=t.width/t.nb_values
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle*math.pi/180)
cairo_scale(cr,1,-1)
--background
if t.background then
local pts=linear_orientation(t.bg_orientation,t.width,t.height)
local pat = cairo_pattern_create_linear (pts[1],pts[2],pts[3],pts[4])
for i=1, #t.bg_colour do
--print ("i",i,t.colour[i][1], rgb_to_r_g_b(t.colour[i]))
cairo_pattern_add_color_stop_rgba (pat, t.bg_colour[i][1], rgb_to_r_g_b(t.bg_colour[i]))
end
cairo_set_source (cr, pat)
cairo_rectangle(cr,0,0,t.width,t.height)
cairo_fill(cr)
cairo_pattern_destroy(pat)
end
--autoscale
cairo_save(cr)
if t.autoscale then
t.max= t.automax*1.1
end
local scale_x = t.width/(t.nb_values-1)
local scale_y = t.height/t.max
--define first point of the graph
if updates-updates_gap <t.nb_values then
t.beg = t.beg - 1
--next line prevent segmentation error when conky window is redraw
--quicly when another window "fly" over it
if t.beg<0 then t.beg=0 end
else
t.beg=0
end
if t.inverse then cairo_scale(cr,-1,1)
cairo_translate(cr,-t.width,0) end
--graph foreground
if t.foreground then
local pts_fg=linear_orientation_inv(t.fg_orientation,t.width,t.height)
local pat = cairo_pattern_create_linear (pts_fg[1],pts_fg[2],pts_fg[3],pts_fg[4])
for i=1,#t.fg_colour,1 do
cairo_pattern_add_color_stop_rgba (pat, 1-t.fg_colour[i][1], rgb_to_r_g_b(t.fg_colour[i]))
end
cairo_set_source (cr, pat)
cairo_move_to(cr,t.beg*scale_x,0)
cairo_line_to(cr,t.beg*scale_x,t.values[t.beg+1]*scale_y)
for i=t.beg, t.nb_values-1 do
cairo_line_to(cr,i*scale_x,t.values[i+1]*scale_y)
end
cairo_line_to(cr,(t.nb_values-1)*scale_x,0)
cairo_close_path(cr)
cairo_fill(cr)
cairo_pattern_destroy(pat)
end
--graph_border
if t.fg_bd_size>0 then
local pts=linear_orientation_inv(t.fg_bd_orientation,t.width,t.height)
local pat = cairo_pattern_create_linear (pts[1],pts[2],pts[3],pts[4])
for i=1,#t.fg_bd_colour,1 do
cairo_pattern_add_color_stop_rgba (pat, 1-t.fg_bd_colour[i][1], rgb_to_r_g_b(t.fg_bd_colour[i]))
end
cairo_set_source (cr, pat)
cairo_move_to(cr,t.beg*scale_x,t.values[t.beg+1]*scale_y)
for i=t.beg, t.nb_values-1 do
cairo_line_to(cr,i*scale_x,t.values[i+1]*scale_y)
end
cairo_set_line_width(cr,t.fg_bd_size)
cairo_stroke(cr)
cairo_pattern_destroy(pat)
end
cairo_restore(cr)
--background border
if t.bg_bd_size>0 then
local pts=linear_orientation(t.bg_bd_orientation,t.width,t.height)
local pat = cairo_pattern_create_linear (pts[1],pts[2],pts[3],pts[4])
for i=1, #t.bg_bd_colour do
--print ("i",i,t.colour[i][1], rgb_to_r_g_b(t.colour[i]))
cairo_pattern_add_color_stop_rgba (pat, t.bg_bd_colour[i][1], rgb_to_r_g_b(t.bg_bd_colour[i]))
end
cairo_set_source (cr, pat)
cairo_rectangle(cr,0,0,t.width,t.height)
cairo_set_line_width(cr,t.bg_bd_size)
cairo_stroke(cr)
cairo_pattern_destroy(pat)
end
cairo_restore(cr)
end
това ми е conkyrc-a:
Код: Избери всички
alignment tr
gap_x 20
gap_y 10
# Graphics settings #
draw_shades no
draw_outline no
draw_borders no
draw_graph_borders no
# Text settings #
use_xft yes
xftfont Droid Sans:size=10
xftalpha 0.8
short_units yes
uppercase no
temperature_unit celsius
default_color FFFFFF
# Lua Load #
lua_load ~/.conky/graph.lua
lua_draw_hook_pre main_graph
TEXT
${alignr 30}${font CAC Champagne:size=16}${time %I:%M}
${goto 30}${font CAC Champagne:size=28}${time %d %B %Y}${font}
${voffset 40}${color #4A78FF}CPU1:${goto 50}$color${cpu cpu0}%
${color #4A78FF}FREQ:${color}${goto 50}${freq}
${color #4A78FF}Temp:${color}${goto 50}${acpitemp}°C
${voffset 20}${color #4A78FF}MEM${goto 50}$color${memperc} %
${color #4A78FF}Used:$color${goto 50}${mem}
${color #4A78FF}Used:$color${goto 50}${memeasyfree}
${voffset 20}${color #4A78FF}HOME${goto 50}$color${fs_used_perc /} %
${color #4A78FF}Used:${goto 50}$color${fs_used /}
${color #4A78FF}Free:${goto 50}$color${fs_free /}
${voffset 20}${color #4A78FF}data${goto 50}$color${fs_used_perc /run/media/vasilissv/data} %
${color #4A78FF}Used:${goto 50}$color${fs_used /run/media/vasilissv/data}
${color #4A78FF}Free:${goto 50}$color${fs_free /run/media/vasilissv/data}
${voffset 20}${color #FF8F00}NETWORK:$color
${downspeedf wlp3s0}
${color #4A78FF}Total${goto 40}$color${totaldown wlp3s0}
${voffset 17}${upspeedf wlp3s0}
${color #4A78FF}Total${goto 40}$color${totalup wlp3s0}
${voffset -10}${execi 300 curl -s "http://weather.yahooapis.com/forecastrss?w=839393&u=c" -o ~/.cache/weather.xml}${font Open Sans Light:size=10}${execi 300 grep "yweather:location" ~/.cache/weather.xml | grep -o "city=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}, ${execi 300 grep "yweather:location" ~/.cache/weather.xml | grep -o "country=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}${font}
${voffset -30}${font Open Sans Light:size=28}${alignr}${execi 300 grep "yweather:condition" ~/.cache/weather.xml | grep -o "temp=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}°${font}${voffset -15}
${execi 300 cp -f ~/.conky-google-now/$(grep "yweather:condition" ~/.cache/weather.xml | grep -o "code=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*").png ~/.cache/weather.png}${image ~/.cache/weather.png -p 150,605 -s 30x30}
#${goto 55}${execi 300 grep "yweather:condition" ~/.cache/weather.xml | grep -o "text=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | tr '[a-z]' '[A-Z]'}
${image ~/.conky-google-now/wind.png -p 20,630 -s 15x15}${goto 55}${execi 300 grep "yweather:wind" ~/.cache/weather.xml | grep -o "speed=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}${execi 300 grep "yweather:units" ~/.cache/weather.xml | grep -o "speed=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}
${image ~/.conky-google-now/humidity.png -p 20,650 -s 15x15}${goto 55}${execi 300 grep "yweather:atmosphere" ~/.cache/weather.xml | grep -o "humidity=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*"}%
${voffset 35}${goto 18}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "day=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==1' | tr '[a-z]' '[A-Z]'}${goto 88}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "day=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==2' | tr '[a-z]' '[A-Z]'}${goto 158}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "day=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==3' | tr '[a-z]' '[A-Z]'}${goto 228}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "day=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==4' | tr '[a-z]' '[A-Z]'}${voffset -10}
${execi 300 cp -f ~/.conky-google-now/$(grep "yweather:forecast" ~/.cache/weather.xml | grep -o "code=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==1').png ~/.cache/weather-1.png}${image ~/.cache/weather-1.png -p 20,670 -s 15x15}${execi 300 cp -f ~/.conky-google-now/$(grep "yweather:forecast" ~/.cache/weather.xml | grep -o "code=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==2').png ~/.cache/weather-2.png}${image ~/.cache/weather-2.png -p 90,670 -s 15x15}${execi 300 cp -f ~/.conky-google-now/$(grep "yweather:forecast" ~/.cache/weather.xml | grep -o "code=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==3').png ~/.cache/weather-3.png}${image ~/.cache/weather-3.png -p 160,670 -s 15x15}${execi 300 cp -f ~/.conky-google-now/$(grep "yweather:forecast" ~/.cache/weather.xml | grep -o "code=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==4').png ~/.cache/weather-4.png}${image ~/.cache/weather-4.png -p 230,670 -s 15x15}${voffset 0}
${goto 20}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "high=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==1'}°${goto 90}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "high=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==2'}°${goto 160}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "high=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==3'}°${goto 230}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "high=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==4'}°${goto 300}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "high=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==5'}°
${goto 20}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "low=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==1'}°${goto 90}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "low=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==2'}°${goto 160}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "low=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==3'}°${goto 230}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "low=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==4'}°${goto 300}${execi 300 grep "yweather:forecast" ~/.cache/weather.xml | grep -o "low=\"[^\"]*\"" | grep -o "\"[^\"]*\"" | grep -o "[^\"]*" | awk 'NR==5'}°
Особено за видеото и хард диска.
